Products Description

The basic working principle of reverse osmosis is: the special high-pressure water pump is used to add raw water to 0.6-2.0MPa pressure so that the raw water will seep through the reverse osmosis membrane with a diameter of only 0.0001 microns under the action of pressure. Chemical ions and bacteria, fungi, and virions cannot pass through and are discharged with the wastewater. Only water molecules and solvents smaller than 0.0001 microns are allowed to pass through.

The security filter is equipped with a filter element with a filter aperture of 5μm. These filter out any particles larger than 5μm in size. It can protect the downstream RO membrane, otherwise, the RO membrane surface is easy to scale. The more commonly used type of permeable membrane is the polyamide membrane. The membrane type is rolled composite membrane. The desalination rate of this type of membrane can reach 99.5%.

Parameters:

Product advantage:

1. Automatic operation, simple operation， can be used outdoors;
2. Compact structure, small volume, less space;
3. High-quality component design, more stable quality;
4. Daily maintenance free, low use cost, many years without trouble;

Main components

• All automatic control system
• Security filter PP melt blown
• High-Pressure pump SS304
• RO Membrane system
• SS304 stainless steel cabinet

1. All Automatic control systems–Program controller.

2. Security filter–prevent large particles, bacteria, and viruses into the RO membrane, accuracy is 5um.

3. High-pressure pump–Provide high pressure to RO membrane.

4. RO Membrane system– the main part of the plant. The RO membrane’s desalting rate can reach 99%, removing over 99% of ions.